Nextwindow 2700 OverlayTouch 42" Guide d'installation télécharger pdf (Page 14)

Installing on a Wall-Mounted Monitor

To install the touch overlay on a wall-mounted monitor, first remove the

monitor from the wall, and then place it onto the overlay. This will require two

people.

Lower the monitor onto the touch overlay, top edge first.

Make sure the top is

a snug fit, then lower the bottom onto the overlay.

Tighten the straps firmly around the display screen, making sure that they do

not cover any connections or air vents.

Re-hanging the monitor

Re-hang the monitor onto the wall, taking care not to dislodge the touch

overlay.

Connecting Cables and Switching On

Connect the cables and switch on power in the following order:

1. Connect the video cable from the computer to the monitor.

2. Connect power to the monitor and switch on.

3. Connect power to the computer and switch on.

4. The next part of the installation depends on whether you are using the

USB or the serial communications option. The appropriate procedures

are described in the following sections.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 32 33

Pas de commentaire

Nextwindow 2700 OverlayTouch 42" Guide d'installation Page 14